Mini Card - Dell XPS M2010 Service Manual

Back to Contents Page

Mini Card

Dell™ XPS™ M2010 Service Manual
Removing a Mini Card
Replacing a Mini Card
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
CAUTION: Only products approved for use in your portable computer may be installed.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal
surface. If you leave the area, ground yourself again when you return to the computer.
Removing a Mini Card
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1. Follow the instructions in
2. With the computer still turned over, remove the memory module cover (see
3. Disconnect the antenna cables from the mini card.
1 antenna cables
4. Release the card by pulling back on the metal securing tabs until the card pops up.
Before Working Inside Your
2 mini card 3
Computer, including removing the system battery.
system board connector
Removing the Memory Module Cover).