1
video cable
2
16. Lay the display on its back on a flat clean surface.
NOTICE:
When working on the display, be careful not to touch the camera. The glass on the camera is fragile.
17. Starting at the top of the panel, remove the black display bezel from around the LCD panel by carefully prying it loose.
1
black display bezel
18. On the silver display inlay, remove four M2.5 x 5-mm screws from the holes labeled "A" and twelve M2.5-mm shoulder
screws from the remaining holes.
solenoid cable
3
2
camera
opening in computer base
3
LCD panel