1
M2.5 x 5-mm screws (3)
4
system board connector (JFAN1)
4. Attach the right fan to the computer frame using three M2.5 x 5-mm screws.
5. Route the right fan cable under the notch on the frame.
6. Connect the right fan cable to the system board connector (JFAN2).
7. Replace the top cover (see
8. Replace the cosmetic covers (see
NOTICE:
To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the
computer.
9. Firmly attach the keyboard to the computer and close the display (see
10. Turn the computer upside down and replace the system battery (see
Back to Contents Page
2
fan cable
5
left system fan
Replacing the Top
Cover).
Replacing the Cosmetic
3
notch in frame
Covers).
Closing the
Replacing the System
Display).
Battery).