Table of Contents
Advertisement
Figure 3.3 Set Data Rates (for Ad Hoc Configured Devices Only)
Select at least one
Basic Rate
Supported
Rates, select the data rate the CB3000 radio defaults to if a higher selected data rate cannot
be maintained.
NOTE: Select supported rates in respect to the data rates supported by the peer
devices within the ad hoc network. For example, if several of the peers within the
network are 802.11b clients, supported data rates should include 11 Mbps,
5.5 Mbps, 2 Mbps and 1 Mbps.
5. Click
Apply
to apply and save the settings, or
To configure the CB3000 into an Infrastructure network instead, see Configuring Infrastructure Settings on
page 3-3.
as a minimum transmit rate value for the CB3000 radio. Within the
Cancel
to exit the screen without saving your changes.
3-7
Network Configuration
Hide quick links:
Advertisement
Table of Contents
