Motorola CB3000 User Manual page 15

2. Attach one end of an Ethernet cable to a RJ-45 jack on a networked computer or router.
3. Connect the other end of the Ethernet cable to the LAN connector on the rear of
the CB3000.
4. Plug the power adapter into the DC-IN connector on the rear of the CB3000.
WARNING! Only use the power adapter supplied by Motorola
with the CB3000. Using an incorrect power adapter could damage
the CB3000 and void the product warranty.
5. Connect the plug end of the power adapter into a power outlet. The built-in power converter
automatically selects and adjusts the power for the appropriate voltage.
6. Verify the installation by checking the status of the LEDs on the front of the CB3000.
Table 2-1 describes the CB3000 LED indicators. If the CB3000's LED functionality has been verified, log into
the CB3000 console to begin basic device configuration (see Logging into the CB3000 on page 2-4).
Figure 2.1 Rear of the CB3000
Figure 2.2 Front of the CB3000
2-3
Getting Started