Motorola CB3000 User Manual page 69

2. Select the Enable SNMP Access
3. Enter a 4-32 character string for read-only SNMP permissions in the
"public".
4. Enter a 4-32 character string for read/write SNMP permissions in the
"private".
5. Enter Start IP and End IP addresses to specify a range of users that can access the CB3000 SNMP
interface. Use just the Start IP Address
unrestricted, do not enter an IP address.
For additional access control, an SNMP-capable client can be set up whereby only the administrator can
use a read/write community definition.
6. Click Add to add the specified IP address(es).
Once added, those IP addresses with an allowed designation display within the
table.
Figure 4.7 SNMP Access Control
checkbox to enable/disable the CB3000 SNMP interface
field to specify a single SNMP user. To leave access
Management Options
Read Only field. The default is
Read Write field. The default is
Allowed IP Addresses
4-11