Table of Contents
Advertisement
3-4 CB3000 Client Bridge User's Guide
3. Configure the
•
Attach to any ESSID automatically
select a target WLAN for connection.
•
Specify the ESSID
menu to select an existing WLAN. Click 'View' to display the available networks first, if unsure of
which network to connect to.
4. Select the
Frequency
Ensure the frequency band selected is consistent with the WLAN network. By restricting the Frequency
Band on the CB3000, you can reduce the time the CB3000 takes to search for available APs.
5. Click the 'View'
Use this screen to view a list of available ESSIDs (networks), and possibly select an ESSID. For more
information, see Available Networks on page 3-1.
6. Select the
Scan Mode
Active Scan mode takes less time when searching for APs by sending probe requests. Passive Scan takes
more time during a scan, but only listens for AP beacons.
Figure 3.2 WLAN Settings—Infrastructure Network Configuration
ESSID (Wireless LAN Service ID)
– Select this button to enter the name of a target WLAN or use the drop-down
Band. Options include 'a/b/g','a', or 'b/g'.
Available Networks
link to view the Available Networks screen.
as either Active Scan or Passive Scan.
field, as appropriate:
– Select this radio button to enable the CB3000 to randomly
Hide quick links:
Advertisement
Table of Contents
