Combine Copyjob Parts - Canon oce 31x5e Daily Maintenance

Combine copyjob parts

A combined copy job consists of several sets of originals. The different jobs
form one job. You can use the combine function in the following cases:
if the originals have different sizes.
I
if the originals have different materials.
I
if the originals include more than 50 sheets.
I
You can change the job settings for each part of a copy job or for the whole job.
With 'combined copy', 2-sided copies from the glassplaten are possible.
Basically, we can identify two groups of originals you can to copy. Each group
requires a different copying procedure.
Standard originals
same size and are 20 lb. bond. The information is identical on all pages, so no
special settings for individual pages are required. The total number of sheets in
the set does not exceed 50 sheets of 8.5x11" or 35 sheets of 11x17" size.
In this case, the set of originals can be placed in the automatic feeder and
copied as a single job. This method is called simple copying.
Special and/or mixed originals
vary in size or consist of more than 50 sheets. Or, the information on some
pages may require deviating settings. The set may also contain special
originals (books, photographs, originals smaller than A5) which need to be
copied from the glass platen.
In this case, the set of originals must be copied in a number of subsets. Each
subset consists of one or more originals. When finished, all subsets will be
combined into a single copy job. This method is described as combined
copying.
Other settings
file, such as reduced/enlarged pages or quality adjustments. If you use the
simple copying method, these settings apply to the entire job, whereas for
combined copying these settings apply to part of the job or even individual
pages.
72 Océ 31x5E Copy jobs & daily maintenance
The set of originals consists of pages which are all of the
The set of originals consists of originals which
You can change settings to get the right images in the resulting