Table of Contents
Advertisement
Take the paper out of the pack. If the pack of paper comes wrapped, remove
3
the top and bottom sheets.
Hold each pack of paper at the two short sides and bend it slightly. Then place
4
it in the tray.
If you are filling paper tray 1, slide the two guides against the sides of the
5
paper, as shown in figure 47. Make sure that the paper is loaded in the correct
feed direction (portrait or landscape).
[47] Adjusting the slides in paper tray 1.
Preprinted and punched paper must be placed face up, with the top
Note:
of the page in the direction shown in figure 35 on page 63.
Push the tray back into place.
6
Repeat for other paper trays, when necessary.
7
Close the door to the paper tray compartment.
8
Maintenance
2
1
3
79
Advertisement
Table of Contents
