Table of Contents
Advertisement
Considerations
Load paperbacked sheets in such a way that the glued side is fed in first.
I
You can use heavy weight paper for covers, but not for complete sets when
I
using the finisher (see 'Copying onto special material (overhead sheets etc.)'
on page 62).
Do not use precopied paper in trays 1, 2, or 3. Precopied paper may be used
I
in tray 4 for making 2-sided copies. You need to place the copied side face-up
in tray 4. When using pre-printed paper, contact Océ for ink specifications.
You can change the paper size in tray 1. The paper sizes in trays 2 and 3 are
I
set by the Océ service technician.
The special feeder can be used for overhead sheets, labels, duraCopy
I
(Durable Form), adhesive film, transparent papers (22 – 29 lb. bond),
polyester drawing film XV (2.5 and 3.5 mil).
Some perforated originals (e.g. with a row of holes > 6 mm [0.24"]) do not
I
handle well, because their holes might pass a sensor. You will have to place
such originals in landscape feed into the automatic feeder.
97
Advertisement
Table of Contents
