Canon oce 31x5e Daily Maintenance page 70

Table of Contents

source. If you select the 'Special feeder', the booklet selection will no longer

be available. If you use the Cover selection (SoftKey 3), two options are

possible: 'None' and 'Front&Back'. The page settings are not supported for

booklet, they are locked on default settings. The Output tray (SoftKey 3) can

be set. The Extra settings (IndexKey 3) make it possible to:

Set the Image quality.

Set the the binding of the originals.

Set how the information on the original is orientated.

The Copy binding (SoftKey 3) is always Short edge, therefore Long edge is

locked.

Margin shift Front and Back are combined into one Margin shift card.

Make a booklet of 8.5x11" originals (2-sided, bookbinding /

calendarbinding)

Select the 'Extra' index, 'Copy Layout' subindex, 'Layout' softkey and select

the Booklet option.

Indicate that the originals are 2-sided using the 'Original' function button.

Make sure that under the 'Extra' index, 'Original layout' subindex, the 'Book

binding' option is active.

If you have calendar binding originals, you have to make sure that

Note:

this option is active in the 'Original layout' subindex.

Place your originals in long-edge (portrait-oriented originals) or in short-edge

(landscape-oriented originals) feed position in the automatic feeder.

Make other selections as required.

Press the start button

Make a 5.5x8.5" booklet with 8.5x11" originals

Select the 'Extra' index, 'Copy Layout' subindex, 'Layout' softkey and select

the Booklet option.

Indicate whether the originals are 1-sided or 2-sided using the 'Original'

function button.

Select the 'Paper' index, 'Paper input' subindex and with SoftKey 3, select the

'Tray' option.

Normally, the machine selects the source automatically.