Speaker assembly
Description
Speaker assembly (includes cable)
Before removing the speaker assembly, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
TouchPad top cover (see
7.
TouchPad LED board (see
Remove the speaker assembly:
1.
Disconnect the speaker cable (1) from the system board.
2.
Gently pry back the tabs on the base enclosure (2) to release the speakers, and then lift up to
remove the speakers (3).
Reverse this procedure to install the speaker assembly.
Downloaded from LpManual.com Manuals
Battery on page
43)
Service access cover on page
Hard drive on page
45)
Optical drive on page
Keyboard on page
52)
Top cover on page
TouchPad LED board on page
44)
47)
55)
60)
Component replacement procedures
Spare part number
641396-001
61