HP Pavilion G6 Maintenance And Service Manual page 80

Hide thumbs Also See for Pavilion G6:

Table of Contents

Remove the system board:

Disconnect the optical drive connector from the system board (1) .

Remove the Phillips 5.0×2.0 screw (2) that secures the system board to the base enclosure.

Lift the system board (3) from the right edge and pull it away from the base enclosure at an

angle.

For AMD computer models, see the following image.

For Intel computer models, see the following image.

Chapter 4 Removal and replacement procedures

Downloaded from LpManual.com Manuals

Table of Contents