Touchpad Led Board - HP Pavilion G6 Maintenance And Service Manual

TouchPad LED board

NOTE: The security cable lock is included with the base enclosure, spare part number 637187-001.
TouchPad LED board
Before removing the TouchPad LED board, remove the following components:
1. Battery (see
2. Service access cover (see
3. Hard drive (see
4. Optical drive (see
5. Keyboard (see
6. Top cover (see
Remove the TouchPad LED board:
1. Position the computer right-side up.
2. Release the zero insertion force (ZIF) connector (1), and disconnect the LED ZIF cable (2) from
the system board.
3. Remove the LED board (3).
Reverse this procedure to install the TouchPad LED board.
60 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 43)
Service access cover on page
Hard drive on page 45)
Optical drive on page
Keyboard on page 52)
Top cover on page 55)
44)
47)
647622-001