Touchpad Button Board - HP Pavilion G6 Maintenance And Service Manual
Hide thumbs
Also See for Pavilion G6:
- Maintenance and service manual (126 pages) ,
- Specifications (2 pages) ,
- Maintenance and service manual (110 pages)
Table of Contents
Advertisement
TouchPad button board
Description
TouchPad button board (includes bracket and cable)
Before removing the TouchPad button board, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the TouchPad button board:
1.
Position the top cover upside down, with the front toward you.
2.
Release the ZIF connector (1), and then disconnect the TouchPad LED ZIF cable (2) from the
TouchPad button.board.
3.
Remove the Phillips PM2.0×3.0 screw (3) that secures the TouchPad bracket to the top cover.
4.
Lift up and remove the TouchPad button board bracket (4). The TouchPad button is fused onto
the TouchPad button board bracket.
Reverse the above procedure to reassemble and install the TouchPad button board.
Downloaded from LpManual.com Manuals
Battery on page
43)
Service access cover on page
Hard drive on page
45)
Optical drive on page
Keyboard on page
52)
Top cover on page
55)
44)
47)
Component replacement procedures
Spare part number
641143-001
59
Advertisement
Table of Contents
