Jet Pump Water Intake; Drain Plugs; Battery - Sea-doo GTI Series Operator's Manual

Jet Pump Water Intake

Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage propulsion unit.
Clean as necessary. If any obstruction
can not be removed, refer to an autho-
rized Sea-Doo dealer for servicing
TYPICAL — INSPECT THESE AREAS
1. Water intake
2. Ride plate

Drain Plugs

Secure bilge drain plugs.
________
SAFETY INFORMATION
TYPICAL
1. Drain plugs
2. Tighten
3. Untighten
WARNING
Ensure bilge drain plugs are prop-
erly secured prior to launching the
watercraft in water.

Battery

WARNING
Verify tightness of battery cables
to their posts and condition of bat-
tery retaining fasteners. Do not
charge or boost battery while in-
stalled in the watercraft.
The battery is located under the stor-
age bin in the front storage compart-
ment.
________
PRE-RIDE INSPECTION
31