Jet Pump Nozzle; Reverse Gate; Jet Pump Water Intake And Ride Plate - Sea-doo 4-TEC GTX Operator's Manual

TYPICAL
1. Drain plugs
2. Tighten
3. Unscrew
Tilt the watercraft slightly to the rear
so that the water can completely flow
out of the bilge.
It is suggested to drain bilge on a
ramp.
CAUTION:
Make sure drain plugs
are properly
launching the watercraft in water.

31) Jet Pump Nozzle

Jet pump nozzle turns side to side via
rider input at the handlebar. This pro-
vides directional control when engine
is running.
secured prior
www.SeaDooManuals.net
TYPICAL
1. Jet pump nozzle

32) Reverse Gate

When selecting the neutral or reverse
position with the shift lever, the re-
verse gate moves up or down to ob-
tain the desired position.
to
TYPICAL
1. Reverse gate
33) Jet Pump Water Intake
and Ride Plate
The water is drawn up by the impeller
through this opening. The water in-
take grate minimizes the entry of for-
eign objects into the propulsion sys-
tem.
NOTE:
changer for the ENGINE cooling sys-
tem.
_____________________
The ride plate is the heat ex-
51