Important Safeguards; Specifications - Waring 800ES Operating Manual

When using electrical appliances, basic safety precautions should always be followed
including the following:
11. READ ALL INSTRUCTIONS.
12. To protect against electrical hazards, do not immerse the Blender Base in water or other
liquid.
13. Close supervision is necessary when any appliance is used by or near children.
14. Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning.
15. Avoid contacting moving parts.
16. Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or electrical or mechanical adjustment.
17. The use of attachments, including canning jars, not recommended by the appliance
manufacturer may cause hazards.
18. Do not use outdoors.
19. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Keep hands and utensils out of container while blending to prevent the possibility of
severe personal injury and/or damage to the blender. A rubber scraper may be used but
must be used only when the blender is not running.
11. Blades are sharp. Handle carefully.
12. If your blender utilizes a removable Jar Base and Blade Assembly – to avoid injury, never
place cutting assembly cutting blades on base without container properly attached.
13. Always operate blender with cover in place.
14. When blending hot liquids, remove center piece of two-piece cover on those units
supplied with this construction. See Hot Blending Instructions.
H
RATINGS
H
MOTORS
H
TIMER
H
BASES
H
CONTAINERS
H
CORD
H
CE LISTED
H
OPERATING
CYCLE:

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

230 VAC – 50 Hz – SINGLE PHASE
PERMANENTLY LUBRICATED SERIES – WOUND
UNIVERSAL TYPE
SOME MODELS HAVE A TIMER, ADJUSTABLE FROM 1 TO
60 SECONDS FOR AUTOMATIC BLENDING, WITH A
MANUAL SETTING FOR CONTINUOUS BLENDING.
ZINC DIE-CASTING WITH EPOXY ENAMEL FINISH OR
POLISHED STAINLESS STEEL.
STAINLESS STEEL, BOROSILICATE GLASS,
POLYCARBONATE OR ACRYLIC PLASTIC.
THREE CONDUCTOR GROUNDED CORD.
3 min ON / 1 min OFF
1