Clutch Lever; Shift Pedal; Brake Lever - Yamaha TDM TWIN 900 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Clutch lever

1
1
2
3
4
1. Clutch lever
The clutch lever is located at the left
5
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
6
bar grip. To engage the clutch, release
the lever. The lever should be pulled
7 rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
8
clutch switch, which is part of the igni-
tion circuit cut-off
9
page 3-19.)
EAU12820

Shift pedal

1. Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission equipped on
this motorcycle.
system. (See
EAU12870

Brake lever

The brake lever is located at the right
1
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.
1. Brake lever
2. Brake lever position adjusting dial
3. "
4. Distance between brake lever and
The brake lever is equipped with a po-
sition adjusting dial. To adjust the dis-
tance between the brake lever and the
handlebar grip, turn the adjusting dial
while holding the lever pushed away
from the handlebar grip. Make sure that
the appropriate setting on the adjusting
3-10
2 1
3
" mark
handlebar grip
EAU26822
4