INSTRUMENT AND CONTROL FUNCTIONS
Catalytic converter
This vehicle is equipped with catalytic
converters in the exhaust system.
1
WARNING
The exhaust system is hot after op-
2
eration. Make sure that the exhaust
system has cooled down before do-
3
ing any maintenance work.
CAUTION:
4
The following precautions must be
observed to prevent a fire hazard or
5
other damages.
G
Use only unleaded gasoline.
6
The use of leaded gasoline will
cause unrepairable damage to
7
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
8
or other materials that easily
burn.
9
G
Do not allow the engine to idle
too long.
EAU13441
Seat
To remove the seat
Insert the key into the seat lock, turn it
EWA10860
counterclockwise, and then pull the
seat off.
2
ECA10700
1. Seat lock
2. Unlock.
To install the seat
Insert the projections on the front of the
seat into the seat holder, push the rear
of the seat down to lock it in place, and
then remove the key.
EAU13860
1. Projection
2. Seat holder
NOTE:
1
Make sure that the seat is properly se-
cured before riding.
3-14
1
2