Replacing The Tail/Brake Light Bulb - Yamaha TDM TWIN 900 Owner's Manual

1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
3. Place a new bulb into position, and
then secure it with the bulb holder.
CAUTION:
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
PERIODIC MAINTENANCE AND MINOR REPAIR
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
G Headlight lens
Do not affix any type of tinted
G
1
film or stickers to the head-
light lens.
Do not use a headlight bulb of
G
a wattage higher than speci-
EWA10790
fied.
1
ECA10650
1. Do not touch the glass part of the bulb.
4. Install the bulb cover, and then
connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Socket
6-30
1. Remove the seat.
page 3-14.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
3. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
EAU24080
(See
2
3
4
5
6
7
8
9