Yamaha TDM TWIN 900 Owner's Manual page 30

INSTRUMENT AND CONTROL FUNCTIONS
each fork leg in direction (b).
1
1
2
3
2
3
1. Standard setting
4
2. Current setting
3. Front fork cap bolt
5
NOTE:
Align the appropriate groove on the ad-
6
justing mechanism with the top of the
front fork cap bolt.
7
Spring preload setting:
8
Minimum (soft):
8
Standard:
9
7
Maximum (hard):
1
Damping force
1
1
2
3
4
5
6
7
8
1. Damping force adjusting screw
1. Turn the adjusting screw on each
fork leg in direction (a) until the
screw moves almost a 1/2 turn
without clicking.
2. Continue turning the adjusting
screw in direction (a) until it clicks.
This is the minimum setting.
3. To increase the damping force,
continue turning the adjusting
screw in direction (a). The third
click after the minimum setting is
the maximum setting. If the adjust-
ing screw is turned further in direc-
tion (a), it will move half a turn
before returning to the minimum
setting.
NOTE:
Make sure that the adjusting screw is
(a)
turned to one of the four settings.
1
4
3 2
3-16
Damping setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
4