Replacing A License Plate Light Bulb - Yamaha VMAX VMX17 Owner's Manual

Replacing a license plate light
bulb
1. Remove the holding plate by re-
moving the bolts.
1. Holding plate
2. Bolt
2. Remove the license plate light lens
by removing the bolts.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU46780
2
1. Bolt
3. Remove the license plate light
socket (together with the bulb) by
1
turning it counterclockwise, and
then pulling it out.
1
1. License plate light bulb socket
2. License plate light bulb
3. License plate light lens
1
2 3
6-35
4. Remove the burnt-out bulb by pull-
ing it out.
5. Insert a new bulb into the socket.
6. Install the socket (together with the
bulb) by pushing it in, and then turn
it clockwise until it stops.
7. Install the license plate light lens
by installing the bolts.
8. Install the holding plate by install-
ing the bolts.
2
3
4
5
6
7
8
9