Yamaha VMAX VMX17 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
G
clock
G
stopwatch
G
countdown clock
G system status
1 G maintenance counters
TIP
2 To return to the Normal mode, push
"SELECT" to scroll to " ", then push
"RESET".
3
Adjusting the brightness
4
This function allows you to adjust the
brightness of the tachometer unit panel
5
("Meter panel"), the tachometer needle
("Needle"), and the speedometer and
6
multi-function displays ("Display") to
suit the outside lighting conditions.
1. Push "SELECT"
7
"Brightness".
8
9
2. Push "RESET", then push "SE-
LECT" to scroll through the func-
tions and to highlight an item.
3. Push "RESET"; the brightness lev-
el segments for the selected item
starts flashing.
4. Push "SELECT" to highlight the
desired brightness level.
5. Push "RESET" to set the bright-
ness level.
6. Push "SELECT" to scroll to " ",
then push "RESET" to return to the
previous menu.
Selecting the shift timing indicator light
settings
to highlight
1. Shift timing indicator light
This function allows you to choose
whether or not the shift timing indicator
light is activated and whether it flashes
or stays on when activated.
1. Push "SELECT" to highlight "Shift
2. Push "RESET".
3. Push "SELECT" to highlight "Oper-
4. Push "RESET".
1
3-8
light".
ation selection".
Push "SELECT" and highlight "On"
to activate the indicator light; the
indicator light comes on and stays
on when activated.
Push "SELECT" and highlight