Yamaha VMAX VMX17 Owner's Manual page 25

2. Push "RESET".
3. Push "SELECT" to highlight "All re-
set".
4. Push "RESET", then push "SE-
LECT" to highlight "Yes".
5. Push "RESET" to reset the bright-
ness and shift timing light indicator
values to the factory setting. The
display returns to the Normal
mode.
TIP
To perform further multi-function dis-
play settings, enter the Select mode
again by pushing and holding "SE-
LECT" and "RESET" for at least three
INSTRUMENT AND CONTROL FUNCTIONS
seconds.
Using the stopwatch
The stopwatch can be activated as fol-
lows.
1. Push "SELECT" to highlight "Stop-
watch".
2. Push "RESET".
3. Push "SELECT" to highlight "Stop-
watch".
4. Push "RESET".
The multi-function display chang-
es to the Normal mode and the
stopwatch is displayed in place of
the clock.
3-11
5. Push "SELECT" to start the stop-
watch.
6. Push "SELECT" or the start switch
" " to stop the stopwatch.
7. Push "RESET" to reset the stop-
watch.
TIP
G If neither "SELECT" or "RESET"
are pushed for one minute, the
screen automatically changes to
the Normal mode.
G
Pushing "RESET" for at least two
seconds changes the screen to
the Normal mode.
G To perform further multi-function
display settings, enter the Select
mode again by pushing and hold-
ing "SELECT" and "RESET" for at
least three seconds.
Using the countdown clock:
The countdown clock can be activated
as follows.
1. Push "SELECT" to highlight "Stop-
watch".
2. Push "RESET".
3. Push "SELECT" to
"Countdown".
2
3
4
5
6
7
8
9
highlight