Yamaha VMAX VMX17 Owner's Manual page 92

MOTORCYCLE CARE AND STORAGE
the finish on the outer surface of
the mufflers.
G
Even the smallest amounts of oil,
such as from oily towels or finger-
1 prints, will leave stains on the tita-
nium mufflers, which can be
removed with a mild detergent.
2
G
Note that the thermally induced
discoloring of the portion of the ex-
3
haust pipe leading into the titanium
mufflers is normal and cannot be
removed.
4
After cleaning
5
1. Dry the motorcycle with a chamois
or an absorbing cloth.
6
2. Immediately dry the drive chain
and lubricate it to prevent it from
rusting.
7
3. Use a chrome polish to shine
chrome, aluminum and stain-
8
less-steel parts.
4. To prevent corrosion, it is recom-
9
mended to apply a corrosion pro-
tection spray
including chrome- and nickel-plat-
ed, surfaces.
5. Use spray oil as a universal clean-
er to remove any remaining dirt.
6. Touch up minor paint damage
caused by stones, etc.
7. Wax all painted surfaces.
8. Let the motorcycle dry completely
before storing or covering it.
WARNING
Contaminants on the brakes or tires
can cause loss of control.
G
Make sure that there is no oil or
wax on the brakes or tires.
G If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle's
braking performance and cor-
nering behavior.
NOTICE
G Apply spray oil and wax spar-
on all metal,
ingly and make sure to wipe off
any excess.
G
Never apply oil or wax to any
rubber and plastic parts, but
G
TIP
EWA11131
G
G
ECA10800
7-3
treat them with a suitable care
product.
Avoid using abrasive polishing
compounds as they will wear
away the paint.
Consult a Yamaha dealer for ad-
vice on what products to use.
Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.