Multi-Function Display - Yamaha VMAX VMX17 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
within the ideal power range. When the
key is turned to "ON", the tachometer
needle will sweep once across the r/
min range and then return to zero r/min
1 in order to test the electrical circuit.
NOTICE
2
Do not operate the engine in the ta-
chometer red zone.
3
Red zone: 9500 r/min and above
4
Shift timing indicator light
See page 3-7 for an explanation and
settings for this indicator light.
5
6
7
8
9

Multi-function display

ECA10031
1. Multi-function display
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
operator and increase the risk of an
accident.
A "SELECT" button and a "RESET"
button are located on the handlebar
holder. These buttons allow you to con-
trol or change the settings in the
multi-function display.
EAU46583
1
1. "SELECT" button
2. "RESET" button
The multi-function display is set to the
EWA12312
Normal mode every time the key is
turned to "ON".
Normal mode
Changing
The following functions are available in
the Normal mode:
G
G
G
G
3-6
1 2
an odometer (which shows the to-
tal distance traveled)
a clock
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning indicator