Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha VMAX VMX17 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
1
have a Yamaha dealer check it.
2
3
4
5
6
7
8
9
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1. Screw
2. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
6-34
EAU24204
1. Turn signal light bulb
2
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
1
[ECA11191]