Checking And Lubricating The Shift Pedal; Checking And Lubricating The Sidestand; Checking The Front Fork - Yamaha VMAX VMX17 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Checking and lubricating the
shift pedal
1
2
3
4
The operation of the shift pedal should
5
be checked before each ride, and the
shift pedal rod pivots should be lubricat-
ed if necessary.
6
Recommended lubricant:
7
Lithium-soap-based grease
8
9
EAU43071
Checking and lubricating the
sidestand
The operation of the sidestand should
be checked before each ride, and the
sidestand pivot and metal-to-metal
contact surfaces should be lubricated if
necessary.
WARNING
If the sidestand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Recommended lubricant:
Lithium-soap-based grease
6-26
EAU23202

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10751]
EWA10731
2. While applying the front brake,
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
EAU23272