Rear Brake Lever; Fuel Tank Cap - Yamaha VERSITY 300 VP300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Rear brake lever

1
3
ZAUM0085
1. Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.
EAU12950

Fuel tank cap

To remove the fuel tank cap
1. Open the seat. (See page 3-11.)
ZAUM0409
1. Fuel tank cap
2. Insert the key into the lock and turn
it 1/4 turn clockwise. The lock will
be released and the fuel tank cap
can be removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the marks on the
cap and tank aligned.
2. Turn the key counterclockwise to
the original position, and then re-
move it.
3. Close the seat.
EAU13140
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
1
Make sure that the fuel tank cap is
properly closed and locked before
riding.
3-9
WARNING
EWA10120