Yamaha VERSITY 300 VP300 Owner's Manual page 21

Ambient temperature display
1
2
3
ZAUM0396
1. Frost warning indicator " "
2. Minus item
3. Temperature
This display shows the ambient tem-
perature from –30 °C (–86 °F) to 50 °C
(122 °F).
The frost warning indicator " " auto-
matically comes on if the temperature is
lower than 3 °C (37.4 °F).
INSTRUMENT AND CONTROL FUNCTIONS
Oil change indicator "OIL"
1
ZAUM0582
1. Oil change indicator "OIL"
The engine oil should be changed
when this indicator comes on. The indi-
cator stays on until it is reset. After
changing the engine oil, reset the indi-
cator as follows.
1. While holding the "MODE" and
"SET" buttons pushed, turn the key
to " ".
2. Continue holding the "MODE" and
"SET" buttons pushed for two to
five seconds.
3. Release the buttons and the oil
change indicator will go off.
3-6
NOTE:
G
The oil change indicator will come
on at the initial 1000 km (600 mi)
and every 3000 km (4800 mi)
thereafter.
G
If the engine oil is changed before
the oil change indicator comes on
(i.e. before the periodic oil change
interval has been reached), the in-
dicator must be reset after the oil
change for the next periodic oil
change to be indicated at the cor-
rect time. After resetting, the indi-
cator will come on for two seconds.
If the indicator does not come on,
repeat the procedure.
3