Yamaha VERSITY 300 VP300 Owner's Manual page 54

PERIODIC MAINTENANCE AND MINOR REPAIR
2
1
2
ZAUM0446
1. Air filter case cover
2. Screw
3. Sponge material
4. Mesh sheet
3. Pull the sponge material out along
with the mesh sheet, clean it with
6
solvent, and then squeeze the re-
maining solvent out.
4. Check the sponge material for
damage and replace it if neces-
sary.
5. Allow the sponge material to dry.
6. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
3 4
ZAUM0447
NOTE:
The sponge material should be wet but
not dripping.
Recommended oil:
Foam air filter oil
7. Insert the sponge material into the
air filter case.
8. Install the air filter case cover by in-
stalling the screws.
Cleaning the V-belt case air filter el-
ement
1. Remove the air filter case cover by
removing the screws.
2. Remove the V-belt case air filter
cover by removing the screws.
1. V-belt case air filter cover
2. Screw
3. Blow the dirt out of the air filter ele-
1. V-belt case air filter cover
2. V-belt case air filter element
4. Check the V-belt case air filter ele-
6-15
ment with compressed air as
shown.
ment for damage and replace it if
necessary.