Multi-Function Display - Yamaha VERSITY 300 VP300 Owner's Manual

Multi-function display

1 2 3
ZAUM0581
1. "MODE" button
2. Multi-function display
3. "SET" button
The multi-function display is equipped
with the following:
G
an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero, the time passed
since the tripmeters were set to ze-
ro, and the average speed traveled
during this time)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a clock
INSTRUMENT AND CONTROL FUNCTIONS
G
EAUM2050 an ambient temperature display
G
an oil change indicator (which
comes on when the engine oil
should be changed)
NOTE:
G
For the UK, the distance traveled
is displayed in miles and the tem-
perature reading is displayed in °F.
G
For other countries, the distance
traveled is displayed in kilometers
and the temperature reading is dis-
played in °C.
Odometer and tripmeter modes
Pushing the "MODE" button switches
the display between the odometer
mode "Total" and the tripmeter modes
"Trip" in the following order:
Total → Trip 1 → Trip 2 → Trip/fuel →
Total
ZAUM0391
1. Total
2. Trip 1
3. Trip 2
4. Trip/Fuel
NOTE:
G
G
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
Trip 1 or Trip 2 → Time 1 or 2 → Aver-
age speed 1 or 2 → Trip 1 or Trip 2
3-4
"Mode"
1 2
"Mode" "Mode"
4 3
"Mode"
The Trip/fuel odometer is only acti-
vated if the fuel level warning light
comes on.
The Trip 2 odometer is automati-
cally reset after turning the key to
" " and two hours have passed.
3