Rear Brake Lever; Fuel Tank Cap - Yamaha Xenter 125 2011 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Rear brake lever

1
1
2
3
4
1. Rear brake lever
The rear brake lever is located on the
5
left handlebar grip. To apply the rear
brake, pull the lever toward the han-
dlebar grip.
6
This model is equipped with a unifi ed
brake system.
7
When pulling the rear brake lever, the
rear brake and a portion of the front
8
brake are applied. For full braking
performance, apply both brake levers
simultaneously.
9
TIP
● As the unified brake system is
mechanical, additional free play
EAUS1961
can be felt in the front brake lever
when the rear brake lever is be-
ing pulled.
● The unified brake system does
not function when the front brake
is applied alone.

Fuel tank cap

1. Fuel tank cap
2. Match marks
To remove the fuel tank cap
1. Open the seat. (See page 3-11.)
2. Turn the fuel tank cap counter-
To install the fuel tank cap
1. Insert the fuel tank cap into the
2. Close the seat.
Make sure that the fuel tank cap
3-8
1
2
clockwise and pull it off.
tank opening and turn it clockwise
until the " / " marks on the cap
and rubber mat are aligned.
WARNING
EAU1044E
EAUT3590
EWA11091