Front Turn Signal Light; Replacing A Rear Turn Signal Light Bulb Or A Tail/Brake Light Bulb - Yamaha FJR1300AS Owner's Manual

Front turn signal light

This model is equipped with LED-type
front turn signal lights.
If a front turn signal light does not
come on, have a Yamaha dealer check
it.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU54241
Replacing a rear turn signal
light bulb or a tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-35.)
2. Remove the turn signal light bulb
socket (together with the bulb) or
the tail/brake light bulb socket (to-
gether with the bulb) by turning it
counterclockwise.
1. Turn signal light bulb socket
2. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6-33
5. Install the socket (together with
EAU27005
the bulb) by turning it clockwise.
6. Install the passenger seat.
6