Replacing The Tail/Brake Light; Bulb; Replacing A Front Turn Signal Light Bulb - Yamaha Star XVS13CTD 2012 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the tail/brake light

bulb

1. Remove the tail/brake light lens by
removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
7
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
EAU24133
Replacing a front turn signal
light bulb
1. Remove the front turn signal light
outer lens by removing the screws.
1. Screw
2. Remove the inner lens by pulling it
out.
[ECA10681]
1. Inner lens
EAU42462 3. Remove the burnt-out bulb by
4. Insert a new bulb into the socket,
5. Place the inner lens in the original
7-33
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
position, and then install the outer
lens by installing the screws.
NOTICE: Do not overtighten the
screws, otherwise the lens may
break.
[ECA10681]