Yamaha FJR1300AS Owner's Manual page 29

Function display
1
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:06
1. Function display
1 2
5
1. Grip warmer adjusting function
2. Information display selection function
3. Windshield adjusting function
4. Damping force adjusting function
5. Preload adjusting function
INSTRUMENT AND CONTROL FUNCTIONS
Push the menu switch "MENU" to
switch the display between the follow-
ing functions. The display changes
each time the switch is pushed.
 Grip warmer adjusting function
 Information
function
 Windshield adjusting function
 Damping force adjusting function
 Preload adjusting function
TIP
The preload adjusting function will ap-
3
pear only when the vehicle is stopped
with the engine running.
The following pages contain explana-
tion of the grip warmer, information
display, and windshield functions. See
page 3-42 for an explanation of the
preload and damping force adjusting
4
functions.
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used
when the engine is running. There are 4
grip warmer settings.
display selection
To increase the grip warmer tempera-
ture, push the "
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
 Be sure to wear gloves when
 If the ambient temperature is 20
 If the handlebar grip or throttle
3-14
Setting Display
Off
Low
Middle
High
" side of the select
" side of the
using the grip warmers.
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
3
ECA17931