1. Rider seat lock lever
2. Rider seat
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
1. Projection
2. Seat holder
INSTRUMENT AND CONTROL FUNCTIONS
2. Install the passenger seat.
TIP
Make sure that the seats are prop-
erly secured before riding.
The rider seat height can be ad-
justed to change the riding posi-
tion. (See the following section.)
3-36
Adjusting the rider seat height
The rider seat height can be adjusted
to one of two positions to suit the rid-
er's preference.
The rider seat height was adjusted to
the lower position at delivery.
1. Low position
2. High position
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
3-35.)
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
EAU39633
3