Yamaha FJR1300AS Owner's Manual page 21

Hide thumbs Also See for FJR1300AS:
Table of Contents

Advertisement

Try to reset the traction control system
and the lights by following the proce-
dures under "Resetting" on page 3-32.
Electronically adjustable suspen-
sion system warning light "
This warning light comes on if a prob-
lem is detected in the electronically ad-
justable suspension system.
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
Shift down indicator light "
This indicator light flashes when the
transmission gear is too high for the
vehicle speed.
INSTRUMENT AND CONTROL FUNCTIONS
To avoid damaging the YCC-S clutch,
the shift down indicator light flashes
when it is necessary to downshift. If
this occurs, downshift until the indica-
EAU55392
tor light stops flashing.
"
YCC-S system warning light "
If this warning light comes on while rid-
ing, the YCC-S system may not work
correctly. If this occurs:
 It may be impossible to shift out of
the gear you are in.
 The clutch may stay engaged, so
a shuddering sensation may be
felt as you come to a stop.
Stop the vehicle when it is safe to do
so, and park it away from traffic. Have
a Yamaha dealer check the YCC-S
system.
TIP
EAU55431
"
In order to be able to move the vehicle
after it has stopped, if shifting is impos-
sible using the hand shift lever and shift
pedal, proceed as follows:
Place the vehicle on the centerstand,
then while rotating the rear wheel, push
the shift pedal rod and shift pedal rod
pivot forward until the transmission is
in the neutral position.
EAU55442
"
1. Shift pedal rod pivot
2. Shift pedal rod
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
3-6
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents