Yamaha FJR1300AS Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
ing the "RES+" or "SET–" side of the
cruise control setting switch down will
increase or decrease the speed contin-
uously until the switch is released.
You can also manually increase your
3
traveling speed using the throttle. After
you have accelerated, you can set a
new cruising speed by pushing the
"SET–" side of the setting switch. If you
do not set a new cruising speed, when
you return the throttle grip, the vehicle
will decelerate to the previously set
cruising speed.
Deactivating the cruise control sys-
tem
Perform one of the following opera-
tions to cancel the set cruising speed.
The "SET" indicator light will go off.
 Turn the throttle grip past the
closed position in the deceleration
direction.
2 1
1. Closed position
2. Cruise control cancel direction
 Apply the front or rear brake.
 Operate the hand shift lever.
 Operate the shift pedal.
Push the power switch to turn off the
cruise control system. The "
tor light and the "SET" indicator light
will go off.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
Using the resume function
Push the "RES+" side of the cruise
control setting switch to reactivate the
cruise control system. The traveling
3-9
speed will return to the previously set
cruising speed. The "SET" indicator
light will come on.
WARNING
It is dangerous to use the resume
function when the previously set
cruising speed is too high for current
conditions.
TIP
 The resume function operates
when riding in 3rd gear at speeds
between about 50 km/h (31 mi/h)
and 160 km/h (100 mi/h), or 4th or
5th gear at speeds between about
" indica-
50 km/h (31 mi/h) and 180 km/h
(112 mi/h).
 Pushing the power switch while
the system is operating will turn
the system off completely and
erase the previously set cruising
speed. You will not be able to use
the resume function until a new
cruising speed has been set.
EWA16351