Cruise Control System - Yamaha FJR1300AS Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Stop mode function indicator
light " "
This indicator light comes on when the
stop mode function is activated.
If the stop mode function fails to shift
3
down, the indicator light will flash.
See page 3-27 for an explanation of
the stop mode function.
Immobilizer system indicator
light " "
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The self-diagnosis device also detects
EAU55451
problems in the immobilizer system
circuits. (See page 3-24 for an expla-
nation of the self-diagnosis device.)
EAU54681

Cruise control system

This model is equipped with a cruise
control system designed to maintain a
set cruising speed.
The cruise control system operates
only when riding in 3rd gear at speeds
between about 50 km/h (31 mi/h) and
160 km/h (100 mi/h), or 4th or 5th gear
at speeds between about 50 km/h (31
mi/h) and 180 km/h (112 mi/h).
 Improper use of the cruise con-
 When traveling uphill or down-
3-7
WARNING
trol system may result in loss of
control, which could lead to an
accident. Do not activate the
cruise control system in heavy
traffic, poor weather conditions,
or among winding, slippery,
hilly, rough or gravel roads.
hill, the cruise control system
may not be able to maintain the
set cruising speed.
EAU55381
EWA16341