Shift Pedal - Yamaha FJR1300AS Owner's Manual

TIP
This is not an automatic transmission,
only the clutch system is automatic.
The gears must be shifted by the rider
except when stopping the vehicle
while the stop mode function is activat-
ed.
See "Stop mode function switch" (See
page 3-27.) and OPERATION AND IM-
PORTANT RIDING POINTS (See page
5-1.) for further explanation of this sys-
tem.
INSTRUMENT AND CONTROL FUNCTIONS

Shift pedal

1. Shift pedal
This motorcycle is equipped with a
constant-mesh 5-speed transmission.
The shift pedal is located on the left
side of the motorcycle. Neutral is at the
bottom position.
TIP
It is impossible to shift gears unless the
key is in the "ON" position.
The shift pedal can be adjusted to
three positions to suit the rider's pref-
erence.
To adjust the shift pedal position
1. Remove the shift pedal by remov-
ing the bolt.
3-28
EAU40496
3
1
1. Shift pedal
2. Bolt
3. Standard position
2. Move the shift pedal to the desired
position.
3. Install the bolt, and then tighten it
to the specified torque.
Tightening torque:
Shift pedal bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
3