Yamaha XJR1300SP Owner's Manual page 73

1. Headlight coupler
2. Headlight bulb cover
2. Disconnect the headlight coupler,
and then remove the headlight unit
and bulb cover.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Headlight bulb holder
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new bulb into position, and
then secure it with the bulb holder.
6-30
1. Do not touch this area.
CAUTION:
_
Do not touch the glass part of the
headlight bulb to keep it free from
EW000119
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
5. Install the bulb cover, and then
connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EC000105
6