Seat; Helmet Holder - Yamaha XJR1300SP Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Unlock.

Seat

To remove the seat
1. Insert the key into the helmet hold-
er lock, and then turn it as shown.
2. Pull the seat off.
1. Projection
2. Seat holder
EAU01721
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
NOTE:
_
Make sure that the seat is properly se-
cured before riding.
_
1. Unlock.

Helmet holder

To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
_
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
_
3-11
WARNING
EAU00260
EW000030