Rear Wheel - Yamaha XJR1300SP Owner's Manual

1. Drive chain slack adjusting bolt
2. Locknut
3. Axle nut

Rear wheel

To remove the rear wheel
WARNING
_
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
_
1. Loosen the axle nut and the brake
caliper bolts.
PERIODIC MAINTENANCE AND MINOR REPAIR
2. Disconnect the brake torque rod
from the brake caliper by removing
the nut and the bolt.
3. Place the motorcycle on the cen-
terstand.
EAU03760
EW000122
1. Wheel axle
4. Remove the axle nut and the
5. Loosen the locknut and drive
6. Push the wheel forward, and then
NOTE:
_
The drive chain does not need to be
disassembled in order to remove and
install the rear wheel.
_
6-34
brake caliper by removing the
bolts.
chain slack adjusting nut on each
side of the swingarm.
remove the drive chain from the
rear sprocket.
6