Shifting; Recommended Shift Points (For Switzerland Only) - Yamaha XJR1300SP Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS
1. Shift pedal
N. Neutral position

Shifting

5
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the il-
lustration.
NOTE:
_
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel, and then slightly raise it.
_
CAUTION:
_
Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
EAU00423
the transmission.
Always use the clutch while
changing gears to avoid dam-
aging the engine, transmission,
and drive train, which are not
designed to
shock of forced shifting.
_
EC000048
Recommended shift points
(for Switzerland only)
The recommended shift points during
acceleration are shown in the table be-
low.
CF-01E
NOTE:
_
When shifting down two gears at a
time, reduce the speed accordingly
(e.g., down to 35 km/h when shifting
from 4th to 2nd gear).
withstand the
_
5-3
Shift point
(km/h)
1st → 2nd
23
2nd → 3rd
36
3rd → 4th
50
4th → 5th
60
EAU02941