Starting A Warm Engine - Yamaha XJR1300SP Owner's Manual

CAUTION:
_
The oil level warning light should
come on when the start switch is
pushed, and it should go off when
the start switch is released. If the oil
level warning light flickers or re-
mains on after starting, immediately
stop the engine, and then check the
engine oil level and the vehicle for
oil leakage. If necessary, add engine
oil, and then check the warning light
again. If the warning light does not
come on when pushing the start
switch, or if it does not go off after
starting with sufficient engine oil,
have a Yamaha dealer check the
electrical circuit.
_
6. After starting the engine, move the
starter (choke) lever back halfway.
CAUTION:
_
For maximum engine life, never ac-
celerate hard when the engine is
cold!
_
OPERATION AND IMPORTANT RIDING POINTS
EC000034 7. When the engine is warm, turn the
starter (choke) off.
NOTE:
_
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.
_
ECA00045

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.
5-2
EAU01258
5