Vitek vt-3454 bk Manual Instruction page 9

Disc
Disc is not played
back
Some tracks cannot
be played back
Disc is in its place
but tracks cannot
be played back
SD-card
Is not played back
USB-device is not
played back
Specifications
Power supply
Battery supply (not supplied):
Dimensions, mm
Power output
Speakers
Frequency range
Disc loading
The manufacturer reserves the right to make changes to the characteristics of the device without
prior notice.
The service life of the device - five years.
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-Requirements as laid down by the Council Directive
89/336/EEC and to the Low Voltage Regulation (23/73 EEC)
3454IM.indd 9 3454IM.indd 9
The FUNCTION switch is not set to
the CD position
Disc is absent or set improperly
Disc is scratched or dirty
Disc is placed improperly
Disc is scratched or dirty
Improper disc format
The SD-card playback mode is not
selected
The card is not inserted ot there are
no МР3 files on the card
The USB-DEVICE playback mode is
not selected
The USB-device is not inserted ot
there are no МР3 files on the card
Set the FUNCTION switch to the CD
position
Check that the disc is set properly, it
should be placed with its label down
Wipe the disc with a soft cloth, do not
use the damaged discs
Check that the disc is set properly, it
should be placed with its label down
Wipe the disc with a soft cloth, do not
use the damaged discs
Use discs with corresponding format
Select the SD-card playback mode
Check that the card is inserted, make
sure that there are МР3 files on the
card
Select the USB-device playback
mode
Check that the USB-device is insert-
ed, make sure that there are МР3
files on the card
230 V~ 50 Hz
UM 2 ("С") х 8
270 x 239 x 124,5
2 х 1,2 W
2 х 8 Ohm
MW: 530 – 1640 kHz
FM: 63 – 108.8 MHz
Upper
9
ENGLISH
15.09.2010 16:33:19 15.09.2010 16:33:19