Sd Recording - D-Link DCS-2630L User Manual

Section 3 - Configuration
This option allows you to configure and set a schedule for the recording to an inserted microSD card.

SD Recording:

Check this box to enable the recording feature.
Trigger by: Select whether the event is activated by Motion, Schedule, or if the video
is Always recording.
• Motion: Enables recording when motion is detected. You can limit
motion-triggered recording to a specific schedule by selection Only
during and entering the times you want motion-triggered recording
to be enabled.
• Schedule: Enables recording according to a schedule. Enter the times
you want the camera to record. If you are recording snapshots, a
snapshot will be taken every second during these times.
• Always: This will enable continuous recording. If you are recording
snapshots, a snapshot will be taken every second.
• Sound: Enables recording when sound is detected. You can limit
sound-triggered recording to a specific schedule by selection Only
during and entering the times you want sound-triggered recording
to be enabled.
Recording
You can choose to record snapshots or video. Snapshots will use Video
Type: Profile 2. For video recordings, you may choose Video Profile 1 or 3 and
select the file format and recording length. For more on video profile
options, refer to Audio and Video on page 33.
Keep Free Set amount of space to keep free on the microSD card.
Space:
Cyclic:
When this option is selected, it will cause the oldest snapshot/video files
to be deleted when the system requires storage space for new snapshot/
video files.
Click Save Settings to save your changes.
D-Link DCS-2630L User Manual
SD Recording
40