Schedule Video Recording With Motion Detection - D-Link DCS-6220G User Manual

DCS-660G User's Manual
Schedule Video Recording with Motion
Detection
To schedule video recording with motion detection, you must first enable motion detection on the 80.11g
PTZ Internet Camera. Click the Motion Detection button under the Advanced tab from the Configuration
screen to access settings that affect how the DCS-6620G 80.11g PTZ Internet Camera can serve as a
security device by recording only when motion is detected. Note: These settings can be configured
in your Web browser and while logged into the IP surveillance Program.
In this window, follow the steps below to ensure that motion detection is correctly enabled:
 Check "Enable motion detection."
 Click on "New" to have a new window to monitor video.
 Enter in a window name.
 Adjust the "Sensitivity" and "Percentage" levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.
 After adding the motion window, click on save to enable the activity display.
You can add up to 3 motion windows to trigger recording.
For detailed information about each setting, please refer to Configuration > Advanced > Motion Detection
in the section titled "Using the DCS-6620G With an Internet Browser" (page 5).
Next, run the IP surveillance program. Click on the Configurations button and select Scheduler.
D-Link Systems, Inc.
Click Motion Detection

Schedule Video Recording with Motion Detection

15